Best OEM Spare Parts in UAE - Drilltech International

UAE is one of the most popular places to source bearings, spare parts, tires, and lubricants. There is a wide array of factors that contributed to the success of Dubai as the leading provider of various spare parts for the continents in Africa, Europe, the Middle East, and even parts of Asia.  The rapid modernization and industrialization that are sweeping across the globe have increased the need for capital goods.

The various capital goods such as bearings, spare parts, machinery, lubricants, other accessories, and mechanical goods are in demand in a lot of countries, particularly in the African regions.  The spare parts or automotive market in particular is very attractive in various sectors in the UAE-based enterprises.  As a matter of fact, UAE emerged as the top supplier of capital goods in many countries in Southern, Central, and East Africa.

For several decades, UAE has established its credibility as one of the major suppliers of OEM Spare Parts in the Gulf region, particularly in Iran, Africa, and Indian-sub-continent.  These countries are importing their major stock requirements in UAE, as one of their top destinations compared with other sources.  Thus, despite the recession, the spare parts and the automobile industry were able to recover amidst the economic crisis.

However, the increased demand for premium quality and genuine spare parts has also encouraged illegal importers.  These have posed great alarm to the industry of automotive spare parts.  Thus, there is an extensive campaign against illegal importation since they are using illegal channels.

Reports reveal that there are almost 30% of OEM Spare Parts are supplied by illegal imports.  Most buyers prefer pirated goods because it is offered at discounted rates.  Thus, the illegal operators pose great threats to the local distributors and agents who are trying to survive by offering high volume orders and lower profit margins to their customers.

It is important to note that importing low-priced goods with low-quality products poses risks for the safety of the end users.  Thus, it is best to purchase only with accredited distributors and agents to ensure high-quality products with competitive rates.

One of the most extraordinary new trends in the UAE since the OEM Spare Parts dubai1990s has been the explosion in the number of visitors from the republics of the former Soviet Union lured by the many ways money can be made in the Gulf. Enterprising Russians have been traveling to Dubai on specially-chartered flights to buy as many products as they can carry for re-sale at huge profits at home. 

An estimated 100,000 tourists from the former Soviet republics travel to the UAE each year. Each visitor is estimated to spend a minimum of $10,000 in local shops. More than a quarter of this goes on automobile spare parts and related products. As the spare parts trade to the United Arab Emirates gains in stature, there are bound to be new demands from within the Dubai market. The UAE, with its strategic location and its well-established distribution network, can reap rich dividends by catering to the increasing demand for automobile spares, ball bearings, and lubricants in the fast-developing markets of the United Arab Emirates.

For more details visit our website: OEM Spare Parts

Contact: +971 55 9590464

Address: Sharjah Industrial Area No 18, Sharjah, UAE

 

What is Horizontal Directional Drilling? - Drilltech International

Horizontal Directional Drilling or HDD, is a steerable trenchless method of installing underground pipe, conduit, or cable in a shallow arc along a prescribed bore path by using a surface-launched drilling rig, with minimal impact on the surrounding area.

Directional Drilling is used when trenching or excavation is not practical. It is suitable for a variety of soil conditions and jobs including road, landscape and river crossings. Pipe can be made of materials such as PVC, polyethylene, polypropylene, ductile iron, and steel as long as it can be pulled through the drilled hole.

There are 4 Stages in the Horizontal Directional Drilling Process.

Directionally drilling the pilot hole

Stage 1 – Drilling the Pilot Hole

Stage 2 – Pre-Reaming the horizontal boring

Stage 3 – Pullback Operations

Stage 4 – Installation of Conduits

Stage 1 of the Horizontal Directional Drilling Process – Drilling the Pilot Hole

Drilling a pilot hole is the first step in a successful Horizontal Directional Drilling Process. A pilot hole is drilled horizontally and follows a preset design path under and across the barrier. In a housing right behind the directional drilling cutting head, an electronic transmitter is installed. The transmitter sends a signal to the surface, which the receiver reads and relays to the directional drill rig operator. The directional driller can then steer the bore path in any desired direction using the communicated information.

Stage 2 of the Horizontal Directional Drilling Process – Pre-reaming the Horizontal Boring

Directional drilling pre-ream

Once the pilot hole has been completed, the borehole must be enlarged to a suitable diameter for the product pipeline. This is accomplished in the second stage of the Horizontal Directional Drilling Process by “pre reaming” the horizontal boring to successively larger diameters. Generally, the reamer is attached to the drill string on the opposite end of the borehole from the drill and pulled back into the pilot hole. Slurry is pumped into the directionally drilled borehole to maintain the integrity of the hole and to flush out cuttings.

Stage 3 of the Horizontal Directional Drilling Process – Pullback Operations

Directional drilling pull back 

Stage 3 of the horizontal directional drilling process is pullback. Once the directionally drilled hole is enlarged, the conduit can be pulled through it. The pipeline is prefabricated at the end of the bore opposite the drill rig. A reamer is attached to the drill string, and then connected to the product by a pulling head and swivel. The swivel allows for the reamer to turn without the product turning. The directional drilling rig then begins the pullback operation, rotating and pulling on the drill string as well as circulating drilling fluids. The pullback continues until the reamer exits the bore path by the directional drill rig and the pipeline is in place.

Stage 4 of the Horizontal Directional Drilling Process – Installation of Conduits

If the horizontally bored conduit is to carry power lines, fiber optic cable, or some other product, an aircraft cable is inserted into the pipe prior to pulling into position. After the pipe installation, the directional drill rig is used to pull the product into position within the pipe. This final step in the Horizontal Directional Drilling Process includes pressure testing to ensure the integrity of the pipe. For more information on the process, watch this directional drilling animation.

For more details visit our website: Horizontal Directional Drilling

Contact: +971 55 9590464

Address: Sharjah Industrial Area No 18,Sharjah, UAE

Are you Looking for Drilling Equipments – Drilltech International

The Drilltech International team is populated with many employees possessing years of manufacturing and service experience in this specialized industry.

Drilltech International is located in Dubai, the Manufacturing, Fabrication and Services Facility of Oil and Gas, Marine, Power, Chemical and Ship building Industry to support the regional and global Industrial demands. Drilltech International  has always been a trusted partner with the large industrial sector, having delivered engineered products and services by aligning closely with customer objectives and goals. Our branch in UAE is providing support and services for all major oil companies operating in the Middle East and Outside Middle east with diversified activities of Manufacturing, Repair, Engineering, Maintenance, Fabrication, Pressure Testing and Services.

The technical team understands your industry and the challenges you face. Drilltech International has earned a reputation for depth of expertise and quality of service. Our technical support team adds tangible value to product applications and solutions.

Drilling Equipment’s used to drill holes in the ground for such activities as prospecting, well sinking (petroleum, natural gas, water, and salt), and scientific explorations. Drilling holes in rock to receive blasting charges is an operation in tunneling, mining, and other excavating.

Most modern drilling machines are either percussive (chipping rock or ground intermittently by impact) or rotary (involving a cutting or grinding action). A combined rotary-percussive drill uses both types of action when the hardness of the stratum warrants it.

The simplest rotary drill is the earth auger, which is hand-operated and resembles the wood auger used in carpentry. The earth auger, used principally for drilling holes in relatively soft earth, is armed with either a spiral drill or a pod-type drill and is attached to a shaft by a socket joint. Successive sections are added to the shaft as the hole deepens.

Drilling Equipment’s of Rotary drilling may be adapted for use at any angle and is suitable for underground mining. In most rotary drilling, hollow rods of steel provide circulation of cooling water or other fluid. There are three kinds of rotary drill bits: (1) drag bits, which cut the rock with two, three, or four wings, sometimes tipped with tungsten carbide, and are used mostly in soft rock; (2) roller bits, which operate with a crushing action by means of wedge-shaped teeth and are used for harder rock; (3) diamond bits, which grind away the rock. The coring-type diamond bit makes an annular hole, the core of which provides a sample cross section of the strata penetrated and is used for prospecting.

Percussive drilling is slower than rotary drilling but has several special applications, such as for shallow holes. In percussive drilling, blows are applied successively to a tool attached to rods or a cable, and the tool is rotated so that a new portion of the face is attacked at each blow.

Another simple percussive drill consists of one or more lengths of wrought-iron pipe open at both ends, driven by a heavy hammer or, for larger holes, a light pile driver. A second cylinder is sunk inside the first, and water is pumped down the inner pipe to loosen soil and raise debris. For deep boring, rotary drilling has replaced these methods.

Long after the rock drill was invented, manual drilling by two men was still usual in mining operations. One man turned the drill, while the second swung the hammer. Most advances in drilling machinery have been developed by tuneless.

We employ over 50 fully trained personnel who provide Manufacturing, Maintenance, Repair, Overhaul, Reconditioning and other support for all kinds of mechanical and electrical equipment related to Oil and Gas, Marine Industry.

For more details visit our website: Drilling Equipment’s

Contact: +971 55 9590464

Address: Sharjah Industrial Area No 18,Sharjah, UAE

 

 

 

Best OEM Spare Parts – Drilltech International

   An Original Equipment Manufacturer part, as the name suggests is built by the same company which manufactured the original product for the automaker. When looking for spare parts suitable for your engine, you want to procure quality parts towards the right price and availability. Drilltech International of OEM Spare Parts is a specialized supplier and large stock-keeper of OEM spare parts suitable for  engines. With engine parts sourced from European OEM manufacturers specialized in the production of specific parts, we offer an excellent alternative to sourcing parts from the original engine manufacturer without compromising quality.  OEM Parts guarantees that the quality of all spare parts is equivalent to that of the original and fully interchangeable.

Having critical spares on hand is best practice, but sometimes you can be caught out by an unexpected breakdown. Many businesses opt for the latter, but that may become more costly in the long run. Before making this important decision, think about how OEM spare parts can benefit your business.

So, your car needs some work done and that means looking at some new parts. These days however it can be quite confusing whether you will need your garage to get genuine (OE), OEM or even aftermarket parts.

No one wants to pay a higher cost if it’s not required, and you don’t want parts that won’t last or are a lower quality. This is all before you even think about warranties and the confusion that then arises from what seems to be an industry filled with jargon and almost too much information.

Genuine Parts

As one of the leading manufacturers of pump systems, in Drill tech International we recognize how important it is for our clients to keep their operations running smoothly and profitably. That's why we offer quality spare parts with timely delivery when they need it the most. Our OEM spare parts and components are available through our worldwide network of manufacturing facilities and service centers. Our spare parts are produced with the same precision as new products. They fulfill the same criteria and get tested to meet our client's requirements and performance range. Our objective is to ensure that each part fits precisely and brings the pump system performance back to as-new condition.

OEM Spare Parts

These are parts made by the original manufacturing company that may have provided the car maker with parts for the build. These parts are normally identical to the above genuine parts but instead these are sold by the original manufacturer instead of being branded by the car companies to be resold.

The quality of these parts is identical to the OE parts meaning you may be able to use these and not have to worry about voiding any warranty on your vehicle. These parts are also usually cheaper than the branded options.

For More details visit our website: OEM Spare Parts

Contact: +971 55 9590464

Address: Sharjah Industrial Area No 18,Sharjah, UAE

 

 

 

Best Drilling Fluid Suppliers - Drill Tech International

 Drilltech International provides drilling fluid systems and related technologies to the oil and gas industry in accordance with international standards and regulations for both onshore and offshore projects. Our provisions include all types of projects such as development drilling, exploration drilling and HPHT drilling (high pressure high temperature wells).

In Drilling engineering, Drilling Fluid Suppliers, also called drilling mud, is used to aid the drilling of boreholes into the earth. Often used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also used for much simpler boreholes, such as water wells. One of the functions of drilling mud is to carry cuttings out of the hole.

In this article we gathered for you a list of 25 drilling fluids company’s data found on the internet. Of course there will be more and we will update this post from time to time to help any researcher for drilling fluid companies data.

We are Drilling Chemicals Manufacturer and Drilling Fluid Suppliers in UAE. Our company develops and applies the most advanced technologies. We provide services that cater to energy and industrial companies looking for more efficient and environment-friendly solutions. Our company offers a diverse portfolio of technologies and solutions.

We are drilling chemical manufacturers and drilling mud suppliers with a portfolio offering drilling fluids, completion fluids, and technologies to manage fluid waste. Our products and services are trained, committed, and energized to take fluids forward. Together we develop solutions that will optimize your drilling performance and in return maximize the long-term value of your oil and gas wells.

Drill Tech International is a producer, manufacturer, and developer of specialty chemicals in the oilfield industry. Drilltech International high quality and customer-oriented solutions to drilling and completion applications. 

Extensive experience with water and oil base drilling fluid additives, completion and fracturing chemicals, specialty chemicals, product systems, and customized product blends are paramount to our daily operations. Drilltech International new technologies and systems that will improve customer quality, efficiency, cost, and lessen the overall environmental footprint.

As one of the world's premier Drilling Fluids Companies, Oilfield Chemical Company manufactures and supplies a broad range of proprietary oil drilling chemicals for all your drilling needs.  Our solutions are designed to help lower costs and maximize efficiencies.

We can also custom blend chemicals to your exact specifications. Our high-quality specialty chemicals and drilling fluid additives are produced in compliance with all environmental, health, and safety regulations.

Our sophisticated research laboratory and manufacturing facility are centrally located on the Drilltech International within easy reach of oil and gas operators, refiners, and plants.

For more details visit our website: Drilling Fluid Suppliers

Contact: +971 55 9590464

Address: Sharjah Industrial Area No 18, Sharjah, UAE

 

 

 

 

Where Can Buy Your Top Hammer Drill Rig - Drill Tech International

 Drill Tech International is a professional organization founded in 2015 that offers complete drilling systems and solutions for construction, Industrial, mining and quarrying industry and we are representing well known brands in construction & mining equipment, Exploration Drilling Equipment, drilling consumables and OEM replacement parts. Drilling Equipment and solutions for construction, Industry Exposure and  Products.

Since the discovery of resources buried deep under the earth, human beings have tried their hand at improving underground mining techniques. In the quest to improve the functioning of mining industries, many overlook aspects like energy consumption and equipment maintenance.

However, with the safety and energy concerns that arise with activities like coal mining, it is imperative to achieve sustainable development while increasing the productivity of mining activities.

While aiming for productive industrial drilling, it is no secret that picking the right tools can boost the output from mining activities. Here are some variables to consider before picking the industrial drilling tools to increase the efficiency and productivity while underground mining.

Location

Preparing the site where the drill enters is another factor that contributes to the activity's output. This is especially important when it comes to industrial drilling at construction sites. When a drill tip is made to enter a flat surface, the drill is directed by balanced cutting forces and the holes produced are precise.

On the other hand, convex and concave surfaces, or even uneven surfaces require extra effort to flatten the surface and skills from the user's part to achieve good results. Besides, these scenarios call for the RPM of the drill to be reduced, more coolant pressure to be applied, and even external flood coolants to be utilized.

Summing It Up

The productivity of industrial drilling is affected by numerous variables. Picking the right tools after taking these factors into account can make working with mining equipment exponentially better. Expending resources without proper knowledge about factors that contribute to the optimal performance of underground mining tools is both hazardous and wasteful.

The Top Hammer Drill Rig series produced by our company is a top hammer drilling rig for open-air engineering applications. Its core technology uses high-frequency hydraulic rock drilling technology from well-known domestic and foreign manufacturers and floating crawlers to make the drilling rig have flexible transition and positioning , high frequency, efficient rock drilling and other advantages. 

What Is a Top Hammer Drill Rig?

During the process of Top Hammer Drilling, the top hammer drilling rig produces a percussive force on the drill rods or tubes, which is transmitted to the drill bit. The feed device is usually attached with a hinged boom to a mobile unit. The top hammer drill machine is widely used in the mining, construction, and quarrying of rock material. As a professional hydraulic drilling rig manufacturer in UAE, Taiye can provide  various types of the hydraulic rotary rig for top hammer drilling of hard materials.

Can You Use a Top Hammer Drill as a Regular Drill?

This top hammer drill is also called "hydraulic rotary hammer drill", which is a core bore drilling machine with a forward thrusting force. As the drill bit spins, the top hammer drilling machine rapidly vibrates front to back, allowing it to drill through hard materials such as stone, concrete, tile, or brick.

The modes of high-quality top hammer drilling rigs usually have three modes for their function. The "hammer" mode provides a straight impact force. The "drill" mode provides a rotary action as in a regular drill. The "hammer drill" mode provides a combination of both.

Generally speaking, top hammer drilling machines tend to be more expensive than regular drills. Another consideration in hammer drills is weight and size. Top hammer drilling machines tend to be heavier and bigger than regular drills and often come with a side-mounted handle to aid in their control.

A top hammer drill machine certainly can be used as a regular drill by putting it in "drill" mode, it has some limitations and a complete tool inventory should ideally include both. However, if you're only going to buy one drill, a hammer drill is the more versatile of the two.

How Does a Top Hammer Drill Rig Machine Work?

Hydraulic rotary drilling is all about power and speed. You need a lot of power to break into solid rock and high speed to repeatedly hammer away at a work site. For safety and high productivity, many of today's hydraulic borewell machines adopt remote control.

Top hammer hydraulic rotary drilling hammers the rock with impacts transferred from the rock drill to a drill bit in the bottom of a hole. Hydraulic pressure generates the force required pressure builds to a maximum and when released, drives an impact piston forward. When the piston strikes a chuck, it transfers its kinetic energy as a stress wave through a drill rod to the drill bit, which uses this impact energy to break the rock. The hydraulic rotary rig has the highest drilling productivity and the economy requires the operation of all components in the system to be highly synchronized.

For more details visit our website: Top Hammer Drill Rig

Contact: +971 55 9590464

Address: Sharjah Industrial Area No 18,Sharjah, UAE

Best Top Hammer Drill Machine - Drill Tech International

 The Drilltech International  is a professional grade corded hammer drill which is available in 240v or 110v. Corded operation has historically provided more speed and power than battery powered designs, and unlike their cordless counterparts corded hammer drills won’t run out of power halfway through a job. 

They are usually a cheaper option as you don’t have to invest in batteries and chargers; however they are not particularly well suited to driving screws – it is rare to find any kind of torque control on a Top Hammer Drill Machine, and they are often slow to brake once the trigger is released. On top of this they are usually fairly large, heavy machines designed for two-handed operation, all of which makes them difficult to use with precision – especially in cramped spaces. Like corded rotary drills, hammer drills are often available in 110v or 240v – the 240v options can be used with standard household power sockets but the 110v versions can only be used with step down transformers as used on building sites and in other industrial environments.

Top Hammer Drill Machine Overview

1- Combination drill and countersinks (center drills), counter bores, reamers, taps, and other small shank cutters can also be supported in this way.

2- Tapered-shank twist drills may be held directly in the tailstock tapered spindle as long as a good fit exists. 

3- If the drill shank is not the correct size, then a drill socket or sleeve may be used in the tailstock spindle.

4- A twist drill holder is used to support large twist drills with the tailstock center.

5- The drill is inserted into the holder and the tailstock center is placed in the center hole which is located at the rear of the drill holder.

6- The holder will rest on the cross slide or compound rest and must be supported by hand until it is held secure by pressure between the tailstock and headstock. 

7- When using this method, never withdraw or loosen the tailstock spindle while the lathe is rotating or the workpiece can be thrown out at the operator. 

8- Always stop the machine before attempting to withdraw the twist drill.

9- Another method of supporting a large twist drill in the tailstock is to fasten a lathe dog to the drill shank and support the rear of the drill with the tailstock center in the center hole in the tang of the drill.

Top Hammer Drill Machine of Drilling operations

1-  Drilling is the production of cylindrical holes of definite diameters in work pieces by using a multipoint cutting tool called a drill. 

2- The drill chuck is mounted in a tailstock spindle and the feeding on the drill to work is done by rotating the tailstock hand wheel. 

3- To start the drilling operation, compute the correct RPM for the drill and bet the spindle speed accordingly. Ensure the tailstock is clamped down on the lathe. 

4- The feed is controlled by turning the tailstock hand wheel. 

5- The graduations on the tailstock spindle are used to determine the depth of cut. 

6- If a large twist drill is used, it should be preceded by a pilot drill, the diameter of which should be wider than the larger drill web. 

7- Use a suitable cutting fluid while drilling.

8- Always withdraw the drill and brush out the chips before attempting to check the depth of the hole. 

9- If the drill is wobbling and wiggling in the hole, use a tool holder turned backwards to steady the drill.

10- Always use a drill that is properly ground for the material to be drilled. 

11- Use care when feeding the drill into the work to avoid breaking the drill off in the work. 

12- Drill should never be removed from the work while the spindle is turning because the drill could be pulled off the tailstock spindle and cause injury or damage.

Boring 

1- Boring is the process of enlarging and truing an existing drilled or core hole with a single point cutting tool. 

Necessity of boring a hole 

1- To enlarge a drilled hole larger than the drill size as drills are available in standard sizes only. 

2- To obtain concentricity of the hole. 

3- To maintain accuracy of the hole. 

4- To remove the error formed by drilling, and to facilitate the remaining operation. 

5- To obtain better surface finish. 

Types of boring tools 

1- The following are the different types of boring tools. 

1- Solid forged tools. 

2- Boring bars with bits. 

3- Brazed tools. 

4- Throw away bits inserted in special holders. 

Advantages 

 1- Available with square and round shank. 

 2- Enable the tool to mount easily. 

3- Re-grinding is easy. 

4- As the tool is integral, alignment is easy. 

5- Can be easily forged to the required shape and angle.

For more details visit our website: Top Hammer Drill Machine

Contact: +971 55 9590464

Address: Sharjah Industrial Area No 18,Sharjah, UAE